Cooling water thermocouples Type K, Class 1 acc. IEC 584-3

To determine the temperature of the cooling water in the automotive sector, has Electronic Sensor two versions of a cooling water thermocouple for temperatures form -50 up to + 200 °C (+ 400 °C) developed. In this case the thermocouple type K, J, L, T is arbitrary.

Version A is a cooling water thermocouple type K, for the hose assembly.
It is available for the hose diameter 18, 30, 32, 34 and 36 mm. The left and right attachment of T-brass piece can be made via hose clamps.

The B version is designed for a quick measurement in the vehicle. The thermocouple with a hardened tip is pushed through the radiator hose and secured with cable ties through U-bracket to the coolant hose. After measurement, the thermocouple tip is withdrawn from the tube. The tube seals the puncture site from either itself (depending on tube wall thickness), or issealed by an adhesive tape. 
Time consuming Draining and Refilling the Cooling Water System account. 
The installation length of X and nominal length of Y, can be selected freely.
 

Version A    Order code
Temperature
T-Hose
connection
Tube-Ø
Connection
K-MTE-MS 18-12-18/3m
- 50 up to 200 °C
M18-12-18
brass
18 mm
welded and
pressure tight
solder
K-MTE-MS 30-12-30/3m
M30-12-30
30 mm
K-MTE-MS 32-12-32/3m
M32-12-32
32 mm
K-MTE-MS 34-12-34/3m
M34-12-34
34 mm
K-MTE-MS 36-12-36/3m
M36-12-36
36 mm
Version B    Best.-Bez.:
Temperature
U-bracket
Tube-Ø
 
K-TE 15/X/Y/U-Winkel/085/2KTST33/3m
- 50 up to 400 °C
any installation length
and nominal length
each
 
Lengths x and y please specify when ordering the B version!



 

 

Cooling water thermocouple, screw, 1/2", Type K, Class 1 acc. IEC 584-3

Cooling water thermocouple with cable, Type K, Class 1 to IEC 584-3 is designed for the temperature range from - 50 to + 200 °C. The thermocouple has a removable T-hose connection in brass (heavy duty) and for different tube inner diameter available on request. The thermocouple is welded and soldered watertight. The thermal conduction type K, class 1 is 3 meters with free connection ends.
An assembly with strain relief and thermal connector is available on request.

Order code
Temperature
T-Hose connection 
Tube inner-Ø
Connection
Cooling water MTE/MS 20-12-20 /3m
(screw design)
- 50 up to + 200 °C
M 20-12-20
brass 20 mm

   welded and
     soldered
    watertight